25th November


Home | Sitemap | Check eMail




A Gate Valve, or Sluice Valve, is operated by turning a handwheel, this handwheel is located on a threaded stem or spindle (Rising or Non Rising) this stem can be located inside or out side (inside / outside screw) the main valve body. This stem connects to a wedge closure device. On operation the wedge is lifted in or out of the path of the fluid (Seawater). When fully open, the gate valve has no obstruction in the flow path.

Gate valves should not be used for regulating (throttling) the flow of liquids having been designed to be fully opened or closed.

Our types of Products

  Ball Valves      Gate Valves      Globe Valves     Check Valves      Butterfly Valves

Untitled Document
  Indo-Maksson Hoses

  PVC Braided & Suction Hoses

  Spitmaan Gasket Sheets
  Charminar Ropes / Liners
  Firesil/ Thermosil Millboards
  PTFE Packings & Tapes

  Rubber Sheets

  Teflon Rods/ Bushes/ Sheets

  PVC Water Stops

  Rubberized Cork Sheets

  Global Pneumatic Fittings


  General Hardwares

Home | The Company | Infrastruct

Home | The Company | ApplicationsCertifications | Network | Enquiry | Sitemap | Contact Us

Maintained Siam Computing
Design Global Trendz Technologies


2014 All India Hoses & Polymers.
All rights reserved.