25th November

 

Home | Sitemap | Check eMail

Hydraulic Hose

 

We offer a wide range of hydraulic hoses that is manufactured using quality synthetic rubber and raw material. These find their application in various industries. These hydraulic hoses are widely used in high pressure fuel lines, fuel oil, antifreeze solutions and air and water. Due to good quality and maintaining smooth pressure, these are appreciated by our customers. We also offer our range in customized sizes and length as per the customers’ specifications.

 

SAE 100 R1 AT

 
 

Recommended For

:

Medium pressure hydraulic lines. Meets or exceeds the requirements SAE 100 R1 type AT and DIN EN853 ISN.

Construction

:

Synthetic oil Resistant rubber tube , one high tensile steel wire braid reinforcement nd weather &oil resistant synthetic rubber cover.

Temp. Range

:

- 40 c to +100 c (+120 c intermittent )

 
Reference No. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
                     
1AT-IM-4 6.4 1/4 13.5 0.53 225 3263 900 13050 100 3.9
1AT-IM-5 7.9 5/16 15.0 0.59 215 3118 860 12470 115 4.5
1AT-IM-6 9.5 3/8 17.5 0.69 180 2610 720 10440 127 5.0
1AT-IM-8 12.7 1/2 20.6 0.81 160 2320 640 9280 178 7.0
1AT-IM-10 15.9 5/8 23.7 0.93 130 1885 520 7540 200 7.9
1AT-IM-12 19.1 3/4 27.7 1.09 105 1523 420 6090 241 9.5
1AT-IM-16 25.4 1 35.6 1.40 88 1276 352 5104 300 11.8
1AT-IM-20 31.8 1 1/4 43.5 1.71 63 914 252 3654 420 16.5
1AT-IM-24 38.1 1 1/2 50.6 1.99 50 725 200 2900 500 19.7
1AT-IM-32 50.8 2 64.0 2.52 40 580 160 2320 635 25.0
 

SAE 100 R2 AT

 
 

Recommended For

:

High pressure hydraulic lines .Meets or exceeds the requirements SAE 100 R2 type AT and DIN EN853 2SN

Construction

:

Synthetic oil Resistant rubber tube , two high tensile steel wire braid reinforcement and weather &oil resistant synthetic rubber cover.

Temp. Range

:

- 40 c to +100 c (+120 c intermittent )

 
Reference No. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
                     
2AT-IM-4 6.4 1/4 15.0 0.59 400 5800 1600 23200 100 3.9
2AT-IM-5 7.9 5/16 16.6 0.65 350 5075 1400 20300 115 4.5
2AT-IM-6 9.5 3/8 19.0 0.75 330 4785 1320 19140 127 5.0
2AT-IM-8 12.7 1/2 22.2 0.87 275 3988 1100 15950 178 7.0
2AT-IM-10 15.9 5/8 25.4 1.00 250 3625 1000 14500 200 7.9
2AT-IM-12 19.1 3/4 29.3 1.15 215 3118 860 12470 241 9.5
2AT-IM-16 25.4 1 38.1 1.50 165 2393 660 9570 300 11.8
2AT-IM-20 31.8 1 1/4 48.3 1.90 125 1813 500 7250 420 16.5
2AT-IM-24 38.1 1 1/2 54.6 2.15 90 1305 360 5220 500 19.7
2AT-IM-32 50.8 2 67.3 2.65 80 1160 320 4640 635 25.0
 

SAE 100 R1 A

 
 

Recommended For

:

Medium pressure hydraulic lines .Meets or exceeds the requirements SAE 100 R1 type AT and DIN EN853 IST.

Construction

:

Synthetic oil Resistant rubber tube , two high tensile steel wire braid reinforcement and weather &oil resistant synthetic rubber cover.

Temp. Range

:

- 40 c to +100 c (+120 c intermittent )

 
Reference No. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
                     
1A-IM-4 6.4 1/4 16.0 0.63 225 3263 900 13050 100 3.9
1A-IM-5 7.9 5/16 17.5 0.69 215 3118 860 12470 115 4.5
1A-IM-6 9.5 3/8 19.0 0.78 180 2610 720 10440 127 5.0
1A-IM-8 12.7 1/2 22.2 0.91 160 2320 640 9280 178 7.0
1A-IM-10 15.9 5/8 25.4 1.01 130 1885 520 7540 200 7.9
1A-IM-12 19.1 3/4 29.3 1.19 105 1523 420 6090 241 9.5
1A-IM-16 25.4 1 38.1 1.50 88 1276 352 5104 300 11.8
1A-IM-20 31.8 1 1/4 48.3 1.81 63 914 252 3654 420 16.5
1A-IM-24 38.1 1 1/2 54.6 2.06 50 725 200 2900 500 19.7
1A-IM-32 50.8 2 67.3 2.63 40 580 160 2320 635 25.0
 

SAE 100 R2 A

 
 

Recommended For

:

High pressure hydraulic lines .Meets or exceeds the requirements SAE 100 R2 type A and DIN EN853 2ST

Construction

:

Synthetic oil Resistant rubber tube , two high tensile steel wire braid reinforcement and weather &oil resistant synthetic rubber cover.

Temp. Range

:

- 40 c to +100 c (+120 c intermittent )

 
Reference No. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
  mm Inch mm Inch Bar Psi Bar Psi mm Inch
2A-IM-4 6.4 1/4 17.5 0.69 400 5800 1600 23200 100 3.9
2A-IM-5 7.9 5/16 19.1 0.75 350 5075 1400 20300 115 4.5
2A-IM-6 9.5 3/8 21.4 0.84 330 4785 1320 19140 127 5.0
2A-IM-8 12.7 1/2 24.6 0.97 275 3988 1100 15950 178 7.0
2A-IM-10 15.9 5/8 27.7 1.09 250 3625 1000 14500 200 7.9
2A-IM-12 19.1 3/4 31.8 1.25 215 3118 860 12470 241 9.5
2A-IM-16 25.4 1 39.7 1.56 165 2393 660 9570 300 11.8
2A-IM-20 31.8 1 1/4 50.8 2.00 125 1813 500 7250 420 16.5
2A-IM-24 38.1 1 1/2 57.2 2.25 90 1305 360 5220 500 19.7
2A-IM-32 50.8 2 69.8 2.75 80 1160 320 4640 635 25.0
 

SAE 100 R3

 
 

Recommended For

:

Medium pressure hydraulic oil lines .Meets or exceeds the requirements SAE 100 R3 type A and DIN EN854

Construction

:

Synthetic oil Resistant rubber tube , two Textile braid reinforcement and weather &oil resistant synthetic rubber cover.

Temp. Range

:

- 40 c to +100 c

 
Reference No. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
  mm Inch mm Inch Bar Psi Bar Psi mm Inch
3-IM-3 4.8 3/16 12.7 0.50 105 1523 420 6090 76 3.0
3-IM-4 6.4 1/4 14.3 0.56 87 1250 348 5046 76 3.0
3-IM-5 7.9 5/16 17.5 0.69 84 1218 336 472 101 4.0
3-IM-6 9.5 3/8 19.1 0.7165 78 1131 312 4524 101 4.0
3-IM-8 12.7 1/2 23.8 0.94 70 1015 280 4060 127 5.0
3-IM-10 15.9 5/8 27.0 1.06 61 885 244 3538 140 5.5
3-IM-12 19.1 3/4 31.8 1.25 52 754 208 3016 152 6.0
3-IM-16  25.4  1  38.1  1.50  39  566  156  2250  203  8.0
3-IM-20 31.8 1 1/4 44.5 1.75 26 377 104 1500 254 10.0
3-IM-24 38.1 1 1/2 50.8 2.00 17 247 68 986 205 12.0
3-IM-32 50.8 2 64.0 2.52 15 218 60 870 409 16.1
 

SAE 100 R6

 
 

Recommended For

:

low pressure hydraulic oil lines .Meets or exceeds the requirements SAE 100 R6 type A and DIN EN854

Construction

:

Synthetic oil Resistant rubber tube , one Textile braid reinforcement and weather &oil resistant synthetic rubber cover

Temp. Range

:

- 40 c to +100 c

 
Reference No. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
  mm Inch mm Inch Bar Psi Bar Psi mm Inch
6-IM-3 4.8 3/16 11.1 0.44 35 508 140 2030 51 2.0
6-IM-4 6.4 1/4 12.7 0.50 28 406 112 1624 64 2.5
6-IM-5 7.9 5/16 14.3 0.56 28 406 112 1624 76 3.0
6-IM-6 9.5 3/8 16.0 0.63 28 406 112 1624 76 3.0
6-IM-8 12.7 1/2 19.8 0.78 28 406 112 1624 101 4.0
6-IM-10 15.9 5/8 23.1 1.91 24 348 96 1392 127 5.0
6-IM-12 19.1 3/4 26.6 1.05 21 305 84 1218 152 6.0
6-IM-16  25.4  1  32.5  1.28  15  210 60 870  178  7.0
 

SAE 100 R5

 
 

Recommended For

:

medium pressure hydraulic oil lines .Meets or exceeds the requirements SAE 100 R5 .

Construction

:

Synthetic oil Resistant rubber tube , one braid of high tensile steel wire over one braid of textile reinforcement and an oil &mildew resistant rubber impregnated textile cover.

 

 

Temp. Range

:

- 40 c to +100 c

 
Reference No. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
    mm Inch mm Inch Bar Psi Bar Psi mm Inch
5-IM-4   4.8 3/16 13.2 0.52 210 3045 840 12180 76 3.0
5-IM-5   6.4 1/4 14.8 0.58 210 3045 840 12180 86 3.4
5-IM-6   7.9 5/16 17.2 0.68 157 2277 628 9106 101 4.0
5-IM-8   10.3 13/32 19.5 0.77 140 2030 560 8120 117 4.6
5-IM-10   12.7 1/2 23.4 0.92 122 1769 488 7076 140 5.5
5-IM-12   15.9 5/8 27.4 1.08 105 1522 420 6090 165 6.6
5-IM-16   22.2 7/8 31.4 1.24 56 812 224 3248 188 7.4
5-IM-20   28.6 1.1/8 38.1 1.50 43 624 172 2494 229 9.0
5-IM-24   34.9 1.3/8 44.5 1.75 35 508 140 2030 267 10.5
5-IM-32   46.0 1.13/16 58.9 2.32 24 348 96 1392 338 13.3
                       
 

SAE 100 R5 R

 
 

Recommended For

:

mediun pressure hydraulic oil lines ,meets or exceeds requirements of SAE 100 R5

Construction

:

Synthetic oil Resistant rubber tube , one braid of high tensile steel wire over one braid of textile reinforcement and weather &oil resistant synthetic rubber cover ,

Temp. Range

:

- 40 c to +100 c

 
Reference No. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
  mm Inch mm Inch Bar Psi Bar Psi mm Inch
5R-IM-4 4.8 3/16 13.2 0.52 210 3045 840 12180 76 3.0
5R-IM-5 6.4 1/4 14.8 0.58 210 3045 840 12180 86 3.4
5R-IM-6 7.9 5/16 17.2 0.68 157 2277 628 9106 101 4.0
5R-IM-8 10.3 13/32 19.5 0.77 140 2030 560 8120 117 4.6
5R-IM-10 12.7 1/2 23.4 0.92 122 1769 488 7076 140 5.5
5R-IM-12 15.9 5/8 27.4 1.08 105 1522 420 6090 165 6.5
5R-IM-16 22.2 7/8 31.4 1.24 56 812 224 3248 188 7.4
5R-IM-20 28.6 1.1/1/8 38.1 1.50 43 624 172 2494 229 9.0
5R-IM-24 34.9 10.3/8 44.5 1.75 35 508 140 2030 267 10.5
5R-IM-32 46.0 1.13/16 58.9 2.32 24 348 96 1392 338 13.3
 

SAE 100 R4

 
 

Recommended For

:

low pressure petroleun and water based hydraukic fluids in suction lines or return lines. meets or exceeds the requirements of SAE 100 R4 

Construction

:

Synthetic oil Resistant rubber tube , two braids of textile reinforced with a helical spherical wire to prevent collapse and weather &oil resistant synthetic rubber cover.

Temp. Range

:

- 40 c to +100 c

 
Reference No. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
  mm Inch mm Inch Bar Psi Bar Psi mm Inch
4-IM-12 19.1 3/4 35.0 1.38 21 305 84 1218 127 5.0
4-IM-16 25.4 1 41.4 1.63 17 247 68 986 152 6.0
4-IM-20 31.8 1.1/4 50.8 2.00 14 203 56 812 203 8.0
4-IM-24 38.1 1.1/2 57.1 2.25 11 160 42 609 254 10.0
4-IM-32 50.8 2 69.8 2.75 7 102 28 406 305 12.0
 

HIGH PRESSURE

 
 

Recommended For

:

specially designed for hydraulic systems subjected to high surge peaks& severe operating conditions ,meets or exceeds the requirements of SAE 100 R2 and DINEN 853

Construction

:

Synthetic oil Resistant rubber tube , twohigh tensile steel wire braids reinforcement and weather and oil resistant synthetic rubber cover.

Temp. Range

:

--40 c to +100 c

 
Reference No. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
  mm Inch mm Inch Bar Psi Bar Psi mm Inch
HP2-IM-6 9.5 3/8 22.2 0.87 350 5075 1400 20300 127 5.0
HP2-IM-8 12.7 1/2 25.4 1.00 345 5003 1380 20010 178 7.0
HP2-IM-10 15.9 5/8 28.7 1.13 300 4350 1200 17400 203 8.0
HP2-IM-12 19.1 3/4 32.2 1.27 265 3843 1060 15370 241 9.5
HP2-1M-16 25.4 1 40.9 1.61 210 3045 840 12180 305 12.0
 

MINING BCS 174

 
 

Recommended For

:

high pressure hose particularly used in mining industries ,meets or exceeds the requirements of BCS 174

Construction

:

Synthetic oil Resistant rubber tube , two high tensile steel wire braids reinforcement and synthetic rubber cover.

Temp. Range

:

- 40 c to +100 c

 
Reference No. B.C.S Referrence no. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
    mm Inch mm Inch Bar Psi Bar Psi mm Inch
174-IM-4 DN6-4 6.4 1/4 17.0 0.67 450 6525 1800 26100 101 4.0
174-IM-6 DN10-6 9.5 3/8 21.6 0.85 380 5510 1520 22040 127 5.0
174-IM-8 DN12-8 12.7 1/2 26.4 1.04 362 5249 1448 20996 152 6.0
174-IM-12 DN20-12 19.1 3/4 33.5 1.32 276 4002 1104 16008 229 9.0
174-IM-16 DN25-16 25.4 1 40.6 1.60 215 3118 860 12470 305 12.0
174-IM-20 DN32-20 31.8 1.1/4 47.2 1.86 172 2434 688 9976 381 15.0
174-IM-24 DN40-24 38.1 1.1/2 54.0 2.13 146 2117 584 8468 450 17.7
174-IM-32 DN50-32 50.8 2 66.8 2.63 112 1624 448 6496 600 23.6
 

VERY HIGH PRESSURE

 
 

Recommended For

:

An extra high pressure hose which is an alternative to multi spiral hydraulic hose where a relatively flexible and high pressure hose is required

Construction

:

Synthetic oil Resistant rubber tube , three high tensile steel wire braids reinforcement and synthetic rubber cover which provides working pressure greater than an equivalent diameter of SAE 100 R9,R 12 or 4SP DIN specification.

Temp. Range

:

- 40 c to +100 c

 
Reference No. Hose I.D Hose O.D Maximum Working Pressure Minimum Burst Pressure Minimum Bend Radius
  mm Inch mm Inch Bar Psi Bar Psi mm Inch
333-IM-8 12.7 1/2 25.2 0.99 470 3815 1880 27260 160 6.3
333-IM-10 15.9 5/8 27.7 1.09 400 5800 1600 23200 216 8.5
333-IM-12 19.1 3/4 32.5 1.28 355 5148 1420 20590 162 10.3
333-IM-16 25.4 1 40.6 1.60 310 4495 1240 17980 318 12.5
333-IM-20 31.8 1.1/4 46.5 1.83 240 3480 970 14065 409 16.1
 

Steam Hoses

 
 

IS 10655 Type 2

 
 

Recommended For

:

Designed for use in industry to transfer steam at high temperature. Meets or exceeds requirements of IS10655, type2.

Construction

:

Steam and Heat resistant rubber inner tube, one high tensil wire braid reinforcement and heat resistant outer cover.

Temp. Range

:

Upto 184C

 
Reference No. Hose I.D Hose O.D Maximum Steam Working Pressure Minimum Hydraulic Burst Pressure
  mm Inch mm Inch Bar Psi Bar Psi
10655(2)-IM-6 9.5 3/8 21.2 0.84 10 145 100 1450
10655(2)-IM-8 12.7 1/2 24.1 0.95 10 145 100 1450
10655(2)-IM-10 15.9 5/8 27.2 1.07 10 145 100 1450
10655(2)-IM-12 19.1 3/4 30.4 1.20 10 145 100 1450
10655(2)-IM-16 25.4 1 37.3 1.47 10 145 100 1450
10655(2)-IM-20 31.8 1.1/4 43.6 1.72 10 145 100 1450
10655(2)-IM-24 38.1 1.1/2 50.5 1.99 10 145 100 1450
10655(2)-IM-32 50.8 2 63.2 2.49 10 145 100 1450
 

IS 10655 Type 3

 
 

Recommended For

:

Designed for use in industry to transfer steam at high temperature. Meets or exceeds requirements of IS10655, type3.

Construction

:

Steam and Heat resistant rubber inner tube, one high tensil wire braid reinforcement and heat resistant outer cover.

Temp. Range

:

Upto 204C

 
Reference No. Hose I.D Hose O.D Maximum Steam Working Pressure Minimum Hydraulic Burst Pressure
  mm Inch mm Inch Bar Psi Bar Psi
10655(3)-IM-6 9.5 3/8 23.0 0.91 16 232 160 2320
10655(3)-IM-8 12.7 1/2 26.1 1.03 16 232 160 2320
10655(3)-IM-10 15.9 5/8 29.2 1.15 16 232 160 2320
10655(3)-IM-12 19.1 3/4 32.5 1.28 16 232 160 2320
10655(3)-IM-16 25.4 1 38.4 1.51 16 232 160 2320
10655(3)-IM-20 31.8 1.1/4 46.5 1.83 16 232 160 2320
10655(3)-IM-24 38.1 1.1/2 53.3 2.10 16 232 160 2320
10655(3)-IM-32 50.8 2 66.3 2.61 16 232 160 2320
 

Fuel Dispensing Hoses

 
 

IS 2396

 
 

Recommended For

:

Designed for use in petroleum based fuel dispensing. Meets or exceeds the requirements of IS 2396.

Construction

:

Synthetic rubber inner tube resistant to petrol and diesel fuels, two textile braids reinforcement with electrically bonded copper wire and weather & petroleum based fuels resistant synthetic rubber cover.

Temp. Range

:

-40C to +55C

 
Reference No. Hose I.D Hose O.D Maximum  Working Pressure Minimum  Burst Pressure

Minimum Bend Radius

  mm Inch mm Inch Bar Psi Bar Psi mm inch
2396-IM-12 19.1 3/4 32.0 1.26 8 116 30 435 152 6.0
2396-IM-16 25.4 1 38.1 1.50 8 116 30 435 203 8.0
 

EN 1360

 
 

Recommended For

:

Designed for use in petroleum based fuel dispensing. Meets or exceeds the requirements of EN 1360.

Construction

:

Synthetic rubber inner tube resistant to petrol and diesel fuels, two textile braids reinforcement with electrically bonded copper wire and weather & petroleum based fuels resistant synthetic rubber cover.

Temp. Range

:

-40C to +55C

 
Reference No. Hose I.D Hose O.D Maximum  Working Pressure Minimum  Burst Pressure

Minimum Bend Radius

  mm Inch mm Inch Bar Psi Bar Psi mm inch
1360-IM-12 19.1 3/4 29.5 1.16 16 232 48 696 152 6.0
1360-IM-16 25.4 1 36.0 1.42 16 232 48 696 203 8.0
 

Jack & Rig Hoses

 
 

SUPER JACK HOSE

 
 

Recommended For

:

Designed for use in hydraulic jack application used in jacking systems.

Construction

:

Synthetic oil resistant rubber tube, two high tensile steel wire braids reinforcement and weather & ozone resistant synthetic rubber cover.

Temp. Range

:

-40C to +50C

 
Reference No. Hose I.D Hose O.D Maximum  Working Pressure Minimum  Burst Pressure

Minimum Bend Radius

  mm Inch mm Inch Bar Psi Bar Psi mm inch
JACK-IM-4 6.4 1/4 14.8 0.58 690 10005 1380 20010 102 4.0
JACK-IM-6 9.5 3/8 18.8 0.74 690 10005 1380 20010 127 5.0
 

RIG HOSE

 
 

Recommended For

:

Specifically designed for hot air applications.

Construction

:

Synthetic oil resistant and high temperature rubber tube, two high tensile steel wire braids reinforcement and heat resistant textile braided cover impregnated with synthetic rubber cement.

Temp. Range

:

-40C to +120C

 
Reference No. Hose I.D Hose O.D Maximum  Working Pressure Minimum  Burst Pressure

Minimum Bend Radius

  mm Inch mm Inch Bar Psi Bar Psi mm inch
RIG(HT)-IM-16 25.4 1 35.5 1.40 90 1305 360 5220 300 11.8
RIG(HT)-IM-20 31.8 1.1/4 43.4 1.71 65 943 260 3770 420 16.5
RIG(HT)-IM-24 38.1 1.1/2 50.5 1.99 50 725 200 2900 500 19.7
RIG(HT)-IM-32 50.8 2 64.0 2.52 40 580 160 2320 635 25.0
 
Untitled Document
  Indo-Maksson Hoses

  PVC Braided & Suction Hoses

  Spitmaan Gasket Sheets
  Charminar Ropes / Liners
  Firesil/ Thermosil Millboards
  PTFE Packings & Tapes

  Rubber Sheets

  Teflon Rods/ Bushes/ Sheets

  PVC Water Stops

  Rubberized Cork Sheets

  Global Pneumatic Fittings

  Valves

  General Hardwares

 
 
Home | The Company | Infrastruct

Home | The Company | ApplicationsCertifications | Network | Enquiry | Sitemap | Contact Us

Maintained Siam Computing
Design Global Trendz Technologies

 

© 2014 All India Hoses & Polymers.
All rights reserved.